> Self Adhesive Mesh
> Single Connection
> Twin Conductor
> Kitchens & Bathrooms
The mats can be installed under many floor coverings:
Ceramic, Natural Stone, Slate, Quarrystone, Porcelain, Marble, Limestone & Terrocotta.
Ecofloor Underfloor Heating Mats have a twin conductor cable simplifying installation with a single 3mm "cold tail" connection.
The finished installation is controlled using an easy to use programmable thermostat.
Ecofloor Underfloor Heating Mats are available in 160W/m2 or 200W/m2 heat outputs. The 160W/m2 mat is suitable for internal applications including kitchens, bathrooms and living areas. The 200W/m2 mat is recommended for conservatories or areas prone to high heat losses.
- The final electrical connections should be made by a qualified electrician in accordance with the current wiring regulations.
- All installations require a 30mA RCD (residual current device) for safe operation.
- Rooms requiring more than two mats require connection to the thermostat via a standard junction box.
- Maximum Power Loading - 12W/lin metre
- Diameter - 3.0mm - 4.0mm
- 230V supply
- Twin conductor cable
- 1 x 3m cold tail connection lead
- EMC Safe
When fitting Ecofloor to a timber sub-floor it is essential that you take the standard precautions to stabilise the floor and prevent floor movement. You must always over-board the timber floorboards or chipboard with a surface suitable for tiling. Devine heat recommend Ecomax Insulated Tile Backer Board or primed 18mm WBP Plywood.
Solid Floors
For best performance it is recommended before fitting Ecofloor you fit a layer of Ecomax Insulated Tile Backer Board. This will minimise heat losses & ensure quicker heatup times for the floor. Ecofloor can be laid directly onto an un-insulated floor However this will slow heatup times, increase running costs & is not recommended.
